Wool felt capeline 180gr - Heathered Grey

Introduction

An essential base material for hat making, this capeline is an unfinished blank piece, directly resulting from the felting process (fulling) of the wool. It is presented in a conical shape with a raw, flat brim, ready to be shaped. Composed exclusively of pure sheep's wool, it offers excellent felt density (180 grams), ensuring good shape retention after blocking and stiffening. This item is intended for professionals, millinery students, and hat-making artisans requiring a quality support for the creation of wide-brimmed hats.

Usage Instructions

• Preparation (Shaping): The felt must be generously humidified with steam or by light soaking prior to any manipulation. Using a stable steam source is recommended to soften the fibers and facilitate the controlled shrinking (sizing) necessary for forming on the block.

• Blocking: The capeline is designed to be shaped on wooden blocks or specialized supports. Stretch the felt over the form to achieve the desired crown and brim. Secure firmly with pins, reeds, and string.

• Stiffening (Apprêt): The application of a liquid stiffener is necessary to give the felt the desired final rigidity, as this base is supplied without initial treatment. Choose a stiffener suitable for the required level of firmness (e.g., Permafix 50 or gum arabic).

• Cutting: The brim of the capeline (currently 8-10 cm) can be cut to the final desired dimension and bound (edged) or hemmed according to the planned hat style.

Additional Information

• Composition: 100% Sheep's Wool Felt. Unstiffened.

• Protection: Wool is susceptible to moth larvae (Tineidae). Protection using cedar or anti-moth products is imperative during prolonged storage.

• Sale: Item sold per unit.

• Conservation: Store the felt flat or rolled without excessive tension, away from direct light, moisture, and dust to preserve its color and fibers.

• Color Precision: The indicated shade is Mix Grey. Slight variations in dye lots are possible between different shipments.

Technical Specifications

• Material: Virgin Wool Felt (100% Ovis Aries}).

• Grammage (Weight): Approximately 180 grams.

• Color: Mix Grey.

• Approximate Dimensions (Unformed Raw State):

  • Total Capeline Diameter: 41 to 43 cm.

  • Maximum Raw Crown Height: 14 cm.

  • Minimum Raw Brim Width: 8 to 10 cm.

  • Raw Head Opening Circumference: 62 cm.

Felt Care Instructions

The following advice applies once the felt is made into a hat or to the base if it is handled:

• Brushing: Use a soft, clean brush. Always brush the felt in the same direction to maintain the uniform appearance of the surface.

• Drying: In case of moisture (water or steam), allow the felt to dry naturally in the open air, at room temperature. Avoid any artificial heat source (radiator, hairdryer, etc.) to prevent shrinkage or deformation.

• Cleaning: Light stains can be treated locally with a clean, very slightly dampened cloth, without abrasive rubbing.

Supplementary Note

Product photographs are provided for illustrative purposes only and are not contractual. The shade and visual appearance may vary slightly depending on the dye lot and screen settings. This item is sold per unit.